Skip to main content
GTS Integrated Solutions
Request a Quote
Eicher — Heavy Tipper

Pro 5025T Spare Parts

Components most often requested for the Eicher Pro 5025T, exported from India into Egypt, Dominican Republic. Select what you need below and the list travels with you into the enquiry form.

FIG. 03 — PRO 5025T
Eicher Pro 5025T — heavy tipper, photographed against a plain background.
Step 1 — Select components

Most-requested parts for the Pro 5025T

Tick everything you need. Your selection is carried into the enquiry form, so you do not have to type the list out again. If a part is not listed, add it under Other components.

Components required for the Eicher Pro 5025T
Step 2 — Send the enquiry

Nothing selected yet. Tick at least one component to carry it into the form.

Or go straight to the enquiry form

What to add to your enquiry

A parts enquiry is quotable first time when it carries these. None of them are mandatory on the form — they just remove a round of questions.

  • Quantity per part, and expected annual volume
  • OEM-genuine or aftermarket grade
  • Model year or variant, where the part changed
  • OEM part numbers, if you have them
  • Destination port and country
  • Any packaging or labelling requirement
Schedule entry

Pro 5025T

OEM
Eicher
Model
Pro 5025T
Vehicle type
Heavy Tipper
Exported from
India
Markets served
Egypt, Dominican Republic
Priority parts listed
11

Listed for reference only. Nothing here implies stock, an OEM appointment or an authorisation — every line is quoted per enquiry.

02Parts Reference

Pro 5025T priority spare parts

The components that move most on this model in Egypt and Dominican Republic. If the part you need is not listed, send the part number, a drawing or a photograph — the sourcing route is the same.

  • 01Pro 5025T filter kit
  • 02Pro 5025T brake pads / linings
  • 03Pro 5025T clutch kit
  • 04Pro 5025T wheel bearings and hub seals
  • 05Pro 5025T kingpin / steering parts
  • 06Pro 5025T suspension bushes
  • 07Pro 5025T u-joints
  • 08Pro 5025T water pump
  • 09Pro 5025T starter motor
  • 10Pro 5025T alternator
  • 11Pro 5025T electrical and lighting parts

For tippers: hydraulic hoses, cylinders, PTO and tipping-kit seals.

03Component Photographs

What the Pro 5025T part groups look like

Representative photographs of each component group, as printed in the model catalogue. They show the kind of part, not the exact part that ships — fitment is confirmed against your VIN or chassis number, model year and engine specification when the enquiry is quoted.

  • Air, cabin, oil and fuel filters laid out together.

    Filter Kit

  • Disc brake pads and drum brake linings.

    Brake Pads / Linings

  • Clutch disc, pressure plate and release bearing.

    Clutch Kit

  • Taper roller wheel bearings with oil seals, washers and a castellated nut.

    Bearing Kit

  • Rubber suspension bushes with metal sleeves.

    Suspension Bush Kit

  • Universal joint cross and bearing caps.

    U-Joint / Driveline

  • Cast water pump with impeller housing.

    Water Pump

  • Starter motor with drive pinion.

    Starter / Alternator

Spare Parts Enquiry

Send a parts schedule for the Pro 5025T

Include quantities, whether you need OEM-genuine or aftermarket grade, and the destination market. Spreadsheets and part-number lists can be attached directly to the enquiry form.