Skip to main content
GTS Integrated Solutions
Request a Quote
A fabricator in a hard hat grinding the seam of a large rolled-steel cylinder, sparks spraying across a workshop floor.

Contract Manufacturing & Fabrication

Build to Print, Build to Specification

From your drawing to a finished assembly — automotive structures, industrial fabrication, trailers, containers and reefer bodies, staged so the first article is validated before a batch runs.

02Questions

Manufacturing FAQs

20 questions on scope, process, prototyping and what buyers confirm before sending a drawing.

Need the components that go into the build? Automotive and agri components covers axles, suspension, braking and EV systems. Taking the finished product into a new market? Homologation and market entry picks it up from there.

Does GTS provide contract manufacturing services in India?

Yes. GTS supports build-to-print and build-to-specification manufacturing through directly coordinated projects and a manufacturing partner network. Projects can include automotive structures, fabricated components, truck bodies, trailers, containers, reefers and other industrial assemblies.

Does GTS provide automotive contract manufacturing in India?

Yes. Automotive contract manufacturing support can cover truck bodies, vehicle structures, cabins, chassis components, brackets, fabricated subassemblies, trailers, tippers, tankers and special-purpose vehicle structures.

Does GTS provide sheet metal fabrication services in India?

Yes. GTS coordinates sheet-metal fabrication projects involving cutting, bending, welding, machining, finishing, coating and assembly. Requirements should include drawings, material grade, thickness, tolerances, finish and required batch quantity.

Can GTS support structural steel fabrication?

Yes. Structural fabrication requirements can be evaluated against engineering drawings, dimensions, material grades, welding specifications, finish, application and quantity. Manufacturing may be coordinated through specialised partner facilities according to the project requirement.

Can GTS manufacture truck bodies in India?

Yes. GTS supports truck-body and application-specific body projects using the vehicle chassis data, dimensions, payload requirement and intended operating application. Projects may include cargo bodies, utility bodies and other special body configurations.

Does GTS provide trailer manufacturing support?

Yes. Trailer manufacturing support covers flatbed trailers, container trailers, low-bed trailers, tipper trailers, tanker trailers, box trailers, curtain-side trailers and special-purpose trailer configurations.

Can GTS manufacture tipper bodies and tipper trailers?

Yes. Tipper-body and tipper-trailer projects can be developed against the vehicle or trailer specification, payload, material, body volume, axle configuration, hydraulic requirement and intended duty cycle.

Does GTS manufacture containers in India?

GTS provides manufacturing support for dry-freight containers, cargo containers, custom containers, office containers, workshop containers and special-application containers. Specifications are evaluated according to dimensions, material, application and required quantity.

Can GTS manufacture reefer bodies and refrigerated containers?

Yes. Reefer projects can include insulated truck bodies, refrigerated containers, insulated panels, doors, flooring, cooling-unit integration and temperature-monitoring requirements for cold-chain and temperature-controlled transport applications.

Can GTS support tanker manufacturing and fabrication?

Yes. GTS can evaluate tanker and special-purpose fabrication requirements against capacity, material, chassis or trailer configuration, transported product, dimensions and applicable engineering or regulatory specifications.

Does GTS manufacture special-purpose vehicle bodies?

Yes. GTS supports application-specific vehicle structures and body solutions based on a customer's drawings, operational requirements and vehicle platform. The manufacturing route depends on technical complexity, required processes and production volume.

Can GTS manufacture automotive chassis structures and brackets?

Yes. Chassis structures, brackets and fabricated automotive subassemblies can be evaluated for build-to-print manufacturing. Buyers should provide drawings, material specifications, tolerances, welding or process standards, finish and annual volume.

Does GTS provide welding, machining, cutting and bending services?

These processes can be coordinated as part of a manufacturing project through appropriate manufacturing partners. Depending on the requirement, a project can include cutting, bending, welding, machining, painting, coating and final assembly.

Can GTS develop a prototype before mass production?

Yes. GTS recommends a staged prototype-to-production approach where appropriate. This normally includes drawing review, manufacturing feasibility, supplier/process selection, first article or prototype development, inspection and approval before repeat production.

Does GTS support build-to-print manufacturing?

Yes. Build-to-print projects can start from customer drawings, specifications and acceptance criteria. GTS evaluates the required materials, manufacturing processes, tolerances, finishes, inspection requirements and volume before confirming the production route.

Can GTS support low-volume and batch manufacturing?

Yes. Selected projects can be structured around prototype, low-volume or scheduled batch production rather than continuous mass production. Commercial feasibility depends on tooling, process setup, materials, complexity and order quantity.

Can GTS manufacture products in India for export markets?

Yes. Manufacturing projects intended for export can be supported with production coordination, inspection, packing, documentation and shipment support. Destination-country certification, testing and regulatory requirements must be reviewed separately where applicable.

Does GTS provide custom fabrication for international customers?

Yes. International customers can submit drawings, samples or technical specifications for custom fabrication in India. GTS reviews manufacturability, supplier/process capability, commercial feasibility and export requirements before proceeding.

Does GTS own its manufacturing facilities?

GTS uses a combination of directly coordinated work and a manufacturing partner network depending on the process, tolerance, capacity and volume required. The proposed manufacturing route is communicated clearly to the customer before a project begins.

What information is needed for a contract manufacturing RFQ?

Provide engineering drawings or sketches, dimensions, material grade, tolerances, surface finish, quantity per batch, expected annual volume, application, destination market and required inspection or testing standards. A physical sample or reference photograph can also support feasibility evaluation.

See every question we are asked →

Manufacturing Enquiry

Send the drawing — we will tell you if it is buildable

Share dimensions, material grade, finish, batch quantity and the application. Drawings, specifications and RFQ documents can be attached to the enquiry form.